Great tool for determining headspace. Especially good for determining where to set your sizing die to push back your case shoulder for bottleneck cases !! I strongly recommend using this headspace tool in conjunction with the Anvil Base tool. The Anvil Base tool will assure proper alignment and without it you will struggle to get your case aligned properly. I know I struggled without the Anvil Base. READ the instructions thoroughly AND read the concept (or You Tube it) to get the Best Understanding of how to use this gauge. Very important !!
Verified purchase: Yes | Condition: New
The tool is easy to use. Mounts directly to the jaw of any digital calipers and measures on the datum line of the cartridge shoulder for repeatable measurement every time. A must have to accurately resize brass and properly set headspace for a specific firearms chamber.
Verified purchase: Yes | Condition: New
this is a must have for serious handloaders;;don't know how i did without this tool for all these years;;used tool to reset all my dies(yes i have many)been reloading for 50 years now;;really like this tool;;my brass should last much longer now;;set my dies to move shoulder back .002"''shells chamber just fine;;a must have;very easy to use;;all you need is a pair of dial calipers
Verified purchase: Yes | Condition: Pre-owned
Great item to match your case sizing to your chamber, or to check fired brass for excessive headspace. Good accuracy, and very easy to use. Great addition for any shooter
Verified purchase: Yes | Condition: New
Great product....necessary to be able to measure shell casing changes off shoulder so headspace can be evaluated not relying on bullet tip or ogive measurements or just case length at the neck. Measurement off the shoulder is key and this does it!
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Dies
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Dies