Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Pistol Parts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Pistol Parts
Easy to install, just remember to wiggle the slide stop when pushing out the trigger pin, which has a groove in it. (do NOT hammer the pin, EVER) Also, leave the locking block pin in the gun when installing this part so the spring on it does not end up above and in front of that pin. (it must be under this pin or you end up with a single shot Glock that locks the slide back after every shot. (been there, done that, got the red face tee shirt). This slide release does not interfere with carry or snag your clothes, makes it much easier for a left handed shooter do drop the slide with trigger finger, and good for right handers with smaller hands too.
Verified purchase: Yes | Condition: New
Own a Gen2 G19 2-pin model. After some research, I confirmed that the slide release part number SP07496 fits my model. It fits both 3-pin and 2-pin models. On 2-pin models, the little spring leg on the slide release rests against the bottom of the locking block (dissasemble your Glock and take note on how your slide release lever is currently installed). I installed it and it's working great. Quick and easy install. No hammer needed.
Verified purchase: Yes | Condition: New
These are now OEM Glock. So during a rebuild, I recently put these on my twenty six year old G20 ,and on my twenty year old G29. You immediately feel a difference on locking the slide back or releasing the slide. Easy to install. You cannot go wrong upgrading that older pistol with these parts!! Ps: The first two pics are before, and the last three are after I put on the new extended slide release.
Verified purchase: Yes | Condition: New
Verified purchase: Yes | Condition: New
Probably the simplest meaningful upgrade that can be made on a Glock. Designed for use on 3 pin Glocks. From a field stripped pistol, simply use a 3/32" punch, & tap (from left to right) the lower pin approximately ½ way, lift & remove old slide release, & slide the new one back into its place. Slide release is slightly longer, with traction grooves, & a slight protrusion aiding in quickly & effortlessly releasing the slide.
Verified purchase: Yes | Condition: New